120Volt Cleanroom Air Shower

 
Cleanrooms are required to adhere to strict regulatory guidelines to prevent contamination. Generally, people wear Coveralls or other protective gear before entering a cleanroom to prevent outside contaminants from , but that isn’t always enough.
 
As contaminants are easily transported by people and objects, which could cause issues in some cleanroom environments. Therefore, cleanroom air showers have become a vital component in maintaining the cleanliness of cleanrooms and other clean-critical environments.
 
Cleanroom air showers are enclosed chambers placed at the entry and exit points of a cleanroom or other controlled environment. Cleanroom air showers use high-velocity jets of air and HEPA or ULPA air filter systems to make air at velocities of 3,000 to 7,000 feet-per-minute (FPM), continuously streams from the jet nozzles for 30–45 seconds that remove loose contaminants from people and products when they pass it. Particle-laden, contaminated air is routed out of the shower compartment through floor vents and returned to the filtration unit. This process can filter the particles in the air and keep the cleanliness.
 
Major Component
 

 
1. LPC Bpard-1pc
2. LED Lamp-1pc
3. Blower-1pc
4. Nozzle-12pcs
5. HEPA Filter-1pc
6. Pre Filter-1pc
 
Technological Parameters:
 

 
Consumable parts illustration
 
1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.
2: HEPA air filter: each one should be replacement in each half and one years.
 
Service